Parameter: Beat Numbers (Frequency Numbers) 1.
Automatic The following beat numbers are selected by automatic selection mode: 12000 , 14400 , 18000 , 19800 , 21600 , 25200 , 28800 , 36000 , 43200 ( If the tested beat is not in automatically selection , the instrument will display the closest beat number , but the test result is not correct . At this time , use the manual mode to select the relative beat . )
Manual selection It can selected out the beat number that Automatic select can not identify and rare beat number. The following beat are selected by Manual selection mode: 3600, 6000, 7200, 7380, 7440, 7800, 9000, 9100, 10800, 11880, 12000, 12342, 12480, 12600, 13320, 13440, 13500, 14000, 14040, 14160, 14200, 14280, 14400, 14520, 14580, 14760, 14850, 15000, 15360, 15600, 16200, 16320, 16800, 17196, 17258, 17280, 17786, 17897, 18000, 18049, 18514, 19332, 19440, 19800, 20160, 20222, 20944, 21000, 21031, 21306, 21600, 25200, 28800, 32400, 36000, 43200 3.
Lift Angle The lift angle is 52° for many common movements, therefore the lift angle value of instrument for factory is set to 52°.
This value is required to calculate the amplitude and must be selected according to the watch movement. The lift angle can be set to between 30°and 70° 4. Period The measuring period selectable: 2s, 4s, 8s, 10s, 20s, 30s, 60s. Use to recalculate the average values of the test result Main Technical Parameters: 1. Daily rate: -999 s/d ~ +999 s/d, allowable tolerance: ±1 s/d 2.Amplitude: 100o ~ 360o, allowable tolerance: ±1o 3.
Beat error: 0 ~ 9.9 ms, allowable tolerance: 0.1 ms 4. Power supply: single - phase AC 110 ~ 240V ±10%, power consumption: about 10 W 5. The NTimegrapher NO.1000 is a precise mechanical watches test instrument, it is used for multi-testing by watch manufacturers and watch technician 6. The frequency diagram of the watch can be displayed in the LCD screen
INR / ₹
USA
-ink_1632391858.jpeg)
-ink_1632378935.jpeg)
_1660994591.jpeg)
_1623669712.jpg)
